Let me know if you guys are having any issues after you guys get familiar with the way the thing navigates.
Ari will be tweaking the search feature to make it better moving forward. In the mean time try changing up your search words if you items are not pulling up immediately.
Once you get used to it (like you did with the other site) you should see that it is far more intuitive to use..
Ok This fellow here (Henry Garberg)has about a half dozen small chillers sitting on his garage floor. These chillers are recovered from large pleasure boats often seen being used by the 1% crowd in Palm Beach.
His company sells these systems new as well. I'm not sure but I think these things have way more cooling power than what one might use for a large aquarium chiller or the like. He said would have no problem dropping temps on an 800-1000 gallon reservoir.
He can supply the info with regard to BTUs and other specifications. He has a good looking used unit on his floor right now (among others) that he said he would sell for $200.
@Smaug, tried the contact info, no answer on phone# listed but did leave a voice mail and Easystartusa.com does not exist in fact Go daddy wants to know if I want to buy it.
The day you quit learning is the day you start dying!
"I am an incurable gadgeteer, and I like enormously to set up a theory and then track down the consequences" Murray Leinster
youtube.com/watch?v=08e9k-c91E8
$200? Pick it up right now and hold it in your warehouse if you are local. Someone is bound to need it. I'd take it just as a spare, but shipping would probably quadruple that cost.
This is a great find, Henry contacted me and I will be purchasing as soon as we work out the deal as I am getting electronics with it. A+ @Smaug
The day you quit learning is the day you start dying!
"I am an incurable gadgeteer, and I like enormously to set up a theory and then track down the consequences" Murray Leinster
youtube.com/watch?v=08e9k-c91E8
Also, I do have enough BabyDragon parts for two complete systems. We have resisted listing them because we would basically flood the website with back ordered BabyDragon parts. We will have more soon.
but in the mean time if anybody is interested in a BabyDragon please email me at smaug@stilldragon.com
The 2" TriClamp Weldless Bulkhead Fitting includes 2 of the special one-sided gaskets but only one is needed - the other can be a spare.
The top side of the fitting is designed to have a complete seal and no liquid or vapors can get past because of the threads.
@Smaug Yes I do, but only 10amps (16a with a very long cord). I did a run with two elements, two 2"-t's, 2"-sightglas, and a Marsh 815 pump to cirkulate the wash... The pump doesn't like boiling :-S
They are making unprecedented progress towards legalizing hobby/home distilling. Check out there progress as they hope to put home distilling on the same classification as home brewing and wine making.
Turns out, many legislators do / did not even realize that home distilling was illegal!
Please check em out and hopefully offer some measure of support. Even joining as a free member will help the cause.
Comments
It looks great and zoom feature works fine. Using M$ IE11 and windows 7...not for long,new stuff on the way :)>-
Nice!!!
Let me know if you guys are having any issues after you guys get familiar with the way the thing navigates.
Ari will be tweaking the search feature to make it better moving forward. In the mean time try changing up your search words if you items are not pulling up immediately.
Once you get used to it (like you did with the other site) you should see that it is far more intuitive to use..
StillDragon North America - Your StillDragon® Distributor for North America
OSX 10.9.4 work fine.
Hey Smaug - nice-looking site.
You need to add a favicon Larry. At the moment it's a dodgy little shopping cart. needs to be SD.
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
( get stilldragon.org/favicon.ico and copy it to stilldragon.com )
Nice site smaug. easy to navigate and find things
Yep thanks Punkin. Its on the way.
StillDragon North America - Your StillDragon® Distributor for North America
Use a thumbnail of your big fat ass? :D =))
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
I do not have any ass. Only a pair of legs stuffed into the underside of my torso.
Bet you feel pretty silly now especially after I have reminded you about this countless times?
StillDragon North America - Your StillDragon® Distributor for North America
Sounds like defensiveness to me. :))
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
Sticks and stones.
StillDragon North America - Your StillDragon® Distributor for North America
I can hear it now"Say punkin does the website make my ass look Big?". =))
Yesterday's order arrived today, all good, thank you Umpah Smaug
Cheers. Thank you sir
StillDragon North America - Your StillDragon® Distributor for North America
Ok This fellow here (Henry Garberg)has about a half dozen small chillers sitting on his garage floor. These chillers are recovered from large pleasure boats often seen being used by the 1% crowd in Palm Beach. His company sells these systems new as well. I'm not sure but I think these things have way more cooling power than what one might use for a large aquarium chiller or the like. He said would have no problem dropping temps on an 800-1000 gallon reservoir.
He can supply the info with regard to BTUs and other specifications. He has a good looking used unit on his floor right now (among others) that he said he would sell for $200.
Can contact him for details and pics.
EasyStart USA
Henry Garberg
561-602-1124
Sales@EasyStartUSA.com
StillDragon North America - Your StillDragon® Distributor for North America
@Smaug, tried the contact info, no answer on phone# listed but did leave a voice mail and Easystartusa.com does not exist in fact Go daddy wants to know if I want to buy it.
The day you quit learning is the day you start dying!
"I am an incurable gadgeteer, and I like enormously to set up a theory and then track down the consequences" Murray Leinster youtube.com/watch?v=08e9k-c91E8
$200? Pick it up right now and hold it in your warehouse if you are local. Someone is bound to need it. I'd take it just as a spare, but shipping would probably quadruple that cost.
This is a great find, Henry contacted me and I will be purchasing as soon as we work out the deal as I am getting electronics with it. A+ @Smaug
The day you quit learning is the day you start dying!
"I am an incurable gadgeteer, and I like enormously to set up a theory and then track down the consequences" Murray Leinster youtube.com/watch?v=08e9k-c91E8
Let me know how it all plays out please.
StillDragon North America - Your StillDragon® Distributor for North America
Some new items on the website. Sorry we took so long.
I have the ProCap Downcomer Extensions listed here: http://stilldragon.com/index.php/components/plate-assemblies/procap-downcomer-extension.html
And the 2" TriClamp Weldless Bulkhead Fitting listed here:
http://stilldragon.com/index.php/components/adapters-and-couplings/2-triclamp-weldless-bulkhead-fitting.html
Also, I do have enough BabyDragon parts for two complete systems. We have resisted listing them because we would basically flood the website with back ordered BabyDragon parts. We will have more soon.
but in the mean time if anybody is interested in a BabyDragon please email me at smaug@stilldragon.com
Cheers
StillDragon North America - Your StillDragon® Distributor for North America
when is the next sea freight shipment, and are monster 4" chillers and 4" HP clamps on it? (they say backorder on the website)
We're getting more clamps within a few weeks. The 4" condensers will be at least another month.
StillDragon North America - Your StillDragon® Distributor for North America
The 2" TriClamp Weldless Bulkhead Fitting includes 2 of the special one-sided gaskets but only one is needed - the other can be a spare.
The top side of the fitting is designed to have a complete seal and no liquid or vapors can get past because of the threads.
Yes, got 2 from @Smaug couple days ago and they are fantastic. :-bd
Can they work as an extra element port on the milkcan?
I don't see why not.
You don't have 220 volts available?
StillDragon North America - Your StillDragon® Distributor for North America
@Smaug Yes I do, but only 10amps (16a with a very long cord). I did a run with two elements, two 2"-t's, 2"-sightglas, and a Marsh 815 pump to cirkulate the wash... The pump doesn't like boiling :-S
Hi again,
For all of you that are not aware, check out the Hobby Distillers Association here.
They can also be found on FaceBook here.
They are making unprecedented progress towards legalizing hobby/home distilling. Check out there progress as they hope to put home distilling on the same classification as home brewing and wine making.
Turns out, many legislators do / did not even realize that home distilling was illegal!
Please check em out and hopefully offer some measure of support. Even joining as a free member will help the cause.
Cheers.
StillDragon North America - Your StillDragon® Distributor for North America