Be part of our community & join our international next generation forum now!
Couldn't wait for the new crystal parrot, and can't afford the shiny stainless parrot. I decided to make my own. Now, I know the solder work is a bit sloppy, but it was my first time. It works great. With my new gained knowledge I will be tweaking and redesigning. Total cost $30 and I have enough to make 2 more.
Comments
Looks great, just give those joints a really good polish with an emory cloth ribbon and soak her in acid for a bit to brighten it up. If you've got a small torch, you can get some of those drips off with the ol' heat-n-flick technique, just don't do it barefoot (or heat-n-wipe). Or if you are really patient, you can file them off and polish - heck you could file nice fillets into all your joints too. It's not structural, you can sand back until you hit copper - there is plenty of solder in the joint itself. Any chance you've got a grinding wheel/buffer? Go to town.
You might want to put a little bit more of a beak on that parrot, I've always found that the output stream was a bit easier to judge if it was coming off a sharper point, but that's just me.
PTFE seals in the ball valve? Probably.
Looks great though, should be more proud of that.
You've done well to make that for $10, looks like it's be $40 worth of fittings in Australia.
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
I like it! B-)
StillDragon Europe - Your StillDragon® Distributor for Europe & the surrounding area
A+, good job @MikeAggie there's no better feeling then the sense accomplishment of a project you envision.
MOCS
The day you quit learning is the day you start dying!
"I am an incurable gadgeteer, and I like enormously to set up a theory and then track down the consequences" Murray Leinster youtube.com/watch?v=08e9k-c91E8
I say this one is better than a purchased one. It has Character. Good job!!
+1
StillDragon North America - Your StillDragon® Distributor for North America
ugly parrot, holds 2 cups, or 1 pint mason jar
this is so ugly,,,,,its cute
i have not figured out how to edit yet..
Looks like an art installation.
Thought the same thing. Not ugly, but different, ART!
Your Place to be >>> www.StillDragon.org <<< Home of the StillDragon® Community Forum