Be part of our community & join our international next generation forum now!
StillDragon has a few advantages over the competition. We can quickly bring new ideas to market and at far lower cost. One of the reasons for this is the work done by Law of Ohms. Here is just a sample of the many models that he has made - each one a labor of love because he does not get paid for them. He is our secret weapon during the development of the more complicated to manufacture items.
Comments
Well done mate, a big happy thank you.
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
Excellent models L.O.O. You should feel very proud to produce these, and a part of the SD revolution :)
Red Dragon...
https://www.youtube.com/watch?v=ty6eY9VUIgI
You going to paint your SGKs red?
exploring options. just remembered you can chrome plate brass, also can get colored chrome
https://www.youtube.com/watch?v=ty6eY9VUIgI
That looks hot LoO. Red, blue or green anodized would really pop against the polished SS.
StillDragon North America - Your StillDragon® Distributor for North America
I take the red one, looks like fire, Dragon style. :)
Your Place to be >>> www.StillDragon.org <<< Home of the StillDragon® Community Forum
Me too
StillDragon North America - Your StillDragon® Distributor for North America
I can't descide, the shiney black one sure caught my eye.
I vote red!
https://www.youtube.com/watch?v=ty6eY9VUIgI
Definately the shiny black, the stainless screw heads would then pop! Make for a real cool industrial steam punk look.
Go one better and also black chrome a set of tri-clamps and make a "punk dash"
I've seen some really cool powder coated parts before - looked like colored glass with a diamond polish. Anyone ever do this here in stainless?
*edited to correct spelring
I'm going to be making a working display model Dash to feature in my new shop if it comes together and for travelling promotions. It will run on a water pump and air pump and circulate either through one of our boilers or a keg depending on the occasion. This would be tops for the SGK and the Triclamps. It'd be great if we could have a couple of colours as stock. Anodising looks way better than powder coating and i agree that black chrome would be awesome.
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
You can black chrome the brass ones easily. To anodize the SGK would need to be made from Aluminium.
https://www.youtube.com/watch?v=ty6eY9VUIgI
https://www.youtube.com/watch?v=ty6eY9VUIgI
see attached 3d PDF of a cut-thru keg
https://www.youtube.com/watch?v=ty6eY9VUIgI
i finally got around to the radius on the 4x4x3 T
https://www.youtube.com/watch?v=ty6eY9VUIgI
That thing looks like a photo!
StillDragon North America - Your StillDragon® Distributor for North America
that was a bit grainy
https://www.youtube.com/watch?v=ty6eY9VUIgI
Mat finish? I like it!
If I had your skills Law Of Ohms I'd be dangerous.
I squeak by with MS Paint.
And I tend to doodle.
So we can or cant ordered them colored like the BP above
Not yet, and maybe never, if you could what color would you get?
https://www.youtube.com/watch?v=ty6eY9VUIgI
I think Pewter, although Red was nice. Maybe alternate between the two.
check this out!
https://www.youtube.com/watch?v=ty6eY9VUIgI
Nice LoO,that is some Damn good graphics!
It is what you make it!
Absolutely top notch
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
I wanna print those in glossy and hang them in the reception area,,,,,,,,,soon as I get a reception area.
StillDragon North America - Your StillDragon® Distributor for North America
https://www.youtube.com/watch?v=ty6eY9VUIgI