StillDragon® Community Forum

Welcome!

Be part of our community & join our international next generation forum now!

In this Discussion

New Stock Arrival

1212223242527»

Comments

  • edited December 2018

    No rush I have a million projects on the burner

  • Just a notice that StillDragon Australia will be discontinuing the Ace of Hearts Baby Dragon. I have run out of stock of lenses and won't be ordering more. It's a slow seller and i have found that most people who purchase one end up upgrading to the 4" Dash system fairly quickly as the lower collection speed of the Ace can frustrate.

    StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand

  • Fair call. I was the same. I stated with a 2" and once I got into the swing of it the slow collection speed was a real pain.
    4" is a great starting size. For most people they'll have no reason to upgrade beyond that. Consider it an investment that you can pass on to the next generation.

  • But, but ,but its so cute...

    StillDragon North America - Your StillDragon® Distributor for North America

  • @Smaug said: But, but ,but its so cute...

    Makes a nice paperweight...

    I'm more like I am now than I was before.

  • Guess which stupid, fat moron just found twenty sets of Baby Dragon lenses?

    StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand

  • I need a clue first....Uh,,,,what shape is his head?

    StillDragon North America - Your StillDragon® Distributor for North America

  • Are they shiny bits?

    I'm more like I am now than I was before.

  • Cucurbita shaped.

    StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand

  • Just an update there are 15 spare element guard kits i had expressed as they have been out of stock for a little while in store now. Full stock should be here in a month, so first in best dressed.

    StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand

  • Still fighting stock shortages here, expressing what i can. Apologies to those awaiting orders from today as i ran out of 2" clamps of all things. Hope to see some arrive in the next week or so.

    StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand

  • Hey how much can the 3600w stainless uld elements be bent?

  • I don't know mate. I have put one in a vice and leaned on it pretty well, posted a pic on here a few years ago. You can certainly get enough angle on them to get them to miss each other in a boiler.

    StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand

  • @punkin said: I don't know mate. I have put one in a vice and leaned on it pretty well, posted a pic on here a few years ago. You can certainly get enough angle on them to get them to miss each other in a boiler.

    Have ordered 2x 3600w and 1x 2400w

    Getting 3x 15amp circuits installed in my new house.

    Going to attempt to bend the 2400w and 3600w in my 70L boil kettle to give space for my immersion chiller. (6000w for 70L is heaps when I've only got 4400w atm) the other 3600w is going into my 50L HLT/Herms

    Hoping this works otherwise I'll need to go back to looking at circle elements or move to a plate chiller (I like keeping cold break in my kettle)

    My 50L milkcan is fine with the 2x 2400w elements already in it (though I may get them rewired)

    Will post results/pictures when I have it done

    Need to find a use for the 2x2200w weldless elements ill now have spare

  • Shipped this morning.

    StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand

  • For all those waiting for the new stock of the 380l boilers, some came yesterday. Also have electric parrots back in stock for those who have been waiting on them.

    StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand

Sign In or Register to comment.