Welcome!
Be part of our community & join our international next generation forum now!
Categories
In this Discussion
- grim December 2016
- Kill_Devil_Spirit_Co January 2017
- punkin December 2016
- Smaug December 2016
Today In The Shop (aka Out of the Shed)
Figured I'd start a thread showcasing builds and gear that exceed the hobby side of our, well, hobby. Not just for new posts, feel free to link or repost some of the amazing things you or the contributors here have put up (give credit where it's due).
Thread inspired by this delivery showing up last week, unfortunately too much AC and plumbing work going on to start putting it together. I'll be using this thread to post about our build but really don't want it to be all about us.
image.jpg
800 x 450 - 72K
Tagged:
Comments
I assume that's not the actual spot where the still will be doing it's Dooty?
StillDragon North America - Your StillDragon® Distributor for North America
1000l?
Yes sir. 1000L Copper Top DoubleDragon.
StillDragon North America - Your StillDragon® Distributor for North America
Do you have a pic of it assembled Laaaarrriiie?
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
@Smaug haha no still a lot of work to do before I place it. The AC people kinda screwed up by not placing the duct far back enough so Laura wants to see if they can do that. Also they need to put finish on the concrete... I am very happy they leveled already.
@grim correct, 1000L copper top baine marie
@punkin, here ya go chief... I think that's a 6" condenser, we went with the 8"
Thought I had a better one than this,,,but can't find it? Its the one on the right hand side.
StillDragon North America - Your StillDragon® Distributor for North America
@Smaug I'm digging too haha, can't seem to find the ones you sent from your shop (mines from China)
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
Wish they could have flown you in to get more familiar. Not that its that difficult,,,but would have been better.
StillDragon North America - Your StillDragon® Distributor for North America
Ah yeah there was a hold up and we had to bring in the 8" PC rather than the 6" they sent.
StillDragon North America - Your StillDragon® Distributor for North America
I'm with you there, I'll probably give you a ring when we're ready to build.
So much cool going on I almost forgot about the copper dephleg.
8" condenser? Nice - big time strip speeds with that.
The performance of the 4" continually surprises me. I can't imagine the 8", the flow rate must be next to nil.
We push about 4gpm - and it has no problem even when the reservoir gets into the 80s.
What's your reservoir size? My plan is a 1000gal tank.
Found a 4" Crystal Dragon out in the wild today.
@Smaug Y'all have successfully infiltrated San Diego.