Wow, that's looking good, the whole setup is neat and looks like its made to fit in the spot you have it.
Like the keg with 1/2 rim cut off, I tossed up doing that or taking the lot off, yours looks easy to move and adjust into place.
Damm you for posting pics like that, I almost feel the need to do another order with punkin for more parts now...I only have 4 plates...
If your like me I'd reckon a grain based wash should be just around the corner, I have 50lt+ of tpw/oaked/whiskey ready to drink now, plus been stripping a grain wash over the last few months, up to gen 4.
It smells totally different to tpw, I hope it turns out just as good-, hang on I meant better than what I'm drinking now.
Thx fadge, have a home made computer controlled brew mash tun I'm think of making a hop free wash and fermenting it out and giving the dragon a few hrs to work its magic.
@fadge said, Damm you for posting pics like that, I almost feel the need to do another order with punkin for more parts now...I only have 4 plates...
yup, that's why i just placed another order with Smaug, so I will be up to ten plates
:D and a lot of my stuff is inspired by pictures from other members like, cooling controll box, thanks to @cooperville Element control box thanks to DIY Controller thread, 1000 liter cooling reservoir, well thanks to you sir and so on. Nice set up @rumdog and I am sure someone is looking at the SGK bling and prolly calling in for a set of their own. No other manufacturer offers this kind of flexibility and adaptability. I am going to end up with 5 plate dash2 SGK plus 4 plate crystal dragon plus single sight tower and a hole in the roof :))
Comments
That is just so fine. Welcome @rumdog.
Love the perfect keg, too.
Thx Lloyd
The Keg's a work in progress, just added a filling point and another element spot, will be firing it up tomorrow night if all goes to plan.
Wow, that's looking good, the whole setup is neat and looks like its made to fit in the spot you have it. Like the keg with 1/2 rim cut off, I tossed up doing that or taking the lot off, yours looks easy to move and adjust into place. Damm you for posting pics like that, I almost feel the need to do another order with punkin for more parts now...I only have 4 plates...
If your like me I'd reckon a grain based wash should be just around the corner, I have 50lt+ of tpw/oaked/whiskey ready to drink now, plus been stripping a grain wash over the last few months, up to gen 4. It smells totally different to tpw, I hope it turns out just as good-, hang on I meant better than what I'm drinking now.
Fadge
Thx fadge, have a home made computer controlled brew mash tun I'm think of making a hop free wash and fermenting it out and giving the dragon a few hrs to work its magic.
Just went down shed and put the finishing touches to the modified boiler.
Good stuff mate. The second element turned up ok then?
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
@fadge said, Damm you for posting pics like that, I almost feel the need to do another order with punkin for more parts now...I only have 4 plates... yup, that's why i just placed another order with Smaug, so I will be up to ten plates :D and a lot of my stuff is inspired by pictures from other members like, cooling controll box, thanks to @cooperville Element control box thanks to DIY Controller thread, 1000 liter cooling reservoir, well thanks to you sir and so on. Nice set up @rumdog and I am sure someone is looking at the SGK bling and prolly calling in for a set of their own. No other manufacturer offers this kind of flexibility and adaptability. I am going to end up with 5 plate dash2 SGK plus 4 plate crystal dragon plus single sight tower and a hole in the roof :))
No charge for your hole! Been thinkin bout stocking those on the website though :))
StillDragon North America - Your StillDragon® Distributor for North America
nice welding!
https://www.youtube.com/watch?v=ty6eY9VUIgI
@smaug yeah on the stocking em holes, and knowing SD cheaper than home depot attic vent :))
Got the parts but missed the element, delivery got to pick it up from TNT depo Monday
Good stuff.
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
Beautiful. Really interested in the sight glass on that keg? Is there a write up somewhere on where to source parts for that ?
3" or 2" stainless ferrule
http://www.stilldragon.com.au/3-stainless-ferrule/
3" or 2" Stilldragon Sight Glass Kit. No other parts required.
http://www.stilldragon.com.au/sight-glass-kit-brass-3/
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand