Be part of our community & join our international next generation forum now!
Why can't everyone make Tee's and 90's that are interchangeable?
They should fit together like this game we played as a kid...
Same reason GM parts don't fit Ford machines?
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
@punkin said: Same reason GM parts don't fit Ford machines?
naa, that is more like the different flavors of DIN fittings...
I just know here we have a couple different manufacturers of copper fittings and they are different lengths and radii.
@punkin said: I just know here we have a couple different manufacturers of copper fittings and they are different lengths and radii.
Shoot there are batch inconsistencies with the same manufacturer for that matter.
StillDragon North America - Your StillDragon® Distributor for North America
Yeah I've got a box of various 2" 90s and it's tough to get two matching.
@grim said: Yeah I've got a box of various 2" 90s and it's tough to get two matching.
Depends who is running the chop saw on any given day, and what side of the mark they are making the cut
I’d love to have more short tees & 90s. More fittings in a smaller space.
I am just thinking/hoping that 'modularity' is a good reason to strive for it in the future for SD?
PVC 90s (and 45s and Ts and couplings and reducers, and bushings...) match well across brands, and schedules too.
Except unions. Try finding a replacement for a cracked union collar, or lost union o-ring. Not even close to matching across brands.
I'm more like I am now than I was before.
The tube radius bender too.
Man I'd love to find a cheap orbital welder on eBay, but that's kind of an oxymoron.
© Moonshine | 18/05/2013 | All rights reserved
StillDragon® is a registered trademark of IETUM LTD
Crystal Dragon™, Dash™ and ProCap36™ are trademarks of the StillDragon® Organization
Comments
Same reason GM parts don't fit Ford machines?
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
naa, that is more like the different flavors of DIN fittings...
I just know here we have a couple different manufacturers of copper fittings and they are different lengths and radii.
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
Shoot there are batch inconsistencies with the same manufacturer for that matter.
StillDragon North America - Your StillDragon® Distributor for North America
Yeah I've got a box of various 2" 90s and it's tough to get two matching.
Depends who is running the chop saw on any given day, and what side of the mark they are making the cut
StillDragon North America - Your StillDragon® Distributor for North America
I’d love to have more short tees & 90s. More fittings in a smaller space.
I am just thinking/hoping that 'modularity' is a good reason to strive for it in the future for SD?
PVC 90s (and 45s and Ts and couplings and reducers, and bushings...) match well across brands, and schedules too.
Except unions. Try finding a replacement for a cracked union collar, or lost union o-ring. Not even close to matching across brands.
I'm more like I am now than I was before.
The tube radius bender too.
Man I'd love to find a cheap orbital welder on eBay, but that's kind of an oxymoron.