How do folks use the cleaning port on the 180 degree bend (3/4 inch cleaning port)
Hi,
I am intending to use this 180 degree bend at the top of my rig to do a CIP flush between runs. Bend is here:
2" Tri-Clamp 180° Bend with 3/4" Port & Thermowell @ StillDragon Europe
I'd like to buy a CIP "rotating spray ball" to plug into a hose of some sort, but haven't been able to identify the right parts to purchase.
I'd be grateful of any recommendations please.
Tagged:
Comments
That port only has about a 19 mm ID. I don't think you'll find a "spray ball" to fit that.
Usually just a ball valve and a corresponding TC to threaded adapter that will allow for a basic hose connection is all you really need for a quick and easy wash out.
StillDragon North America - Your StillDragon® Distributor for North America
Many thanks @Smaug
You could just use a 3/4 TC valve like the parrot drain valve too. Blank it off with a 3/4 cap when not in use.
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand