Hi,
I am new to the forum so thought I would drop by and say hi. I also have a question which I was hoping someone can answer, I have the 100L milk can with a 5 section ProCap bubble plate and the super dephlegmator.
What height will the collector from the parrot be sat at using this configuration?
I have worked the height out to be 2092mm to the high point but can't see any dims for the down portion of the Dash.
thanks all
Comments
i should have mentioned i had just ordered the above hence why i was working out some sizes
In general, there where you like to have it ;)
You can always add some 3/4" pipes to get your preferred height. I would build everything together and the look, where it gets me. I have seen stills where the outlet is on table height and stills where it is rather low with a bucket under it ;)
StillDragon Europe - Your StillDragon® Distributor for Europe & the surrounding area
Yes ideally you'll want the parrot elevation set up according to the height of your collection vessel.
StillDragon North America - Your StillDragon® Distributor for North America