›

Dimensions for placing the Parrot

Potbelly1
edited February 2018 in Configuration

Hi,

I am new to the forum so thought I would drop by and say hi. I also have a question which I was hoping someone can answer, I have the 100L milk can with a 5 section ProCap bubble plate and the super dephlegmator.

What height will the collector from the parrot be sat at using this configuration?

I have worked the height out to be 2092mm to the high point but can't see any dims for the down portion of the Dash.

thanks all

Tagged:

Comments

  • Potbelly1

    i should have mentioned i had just ordered the above hence why i was working out some sizes

  • SunshineSunshine

    In general, there where you like to have it ;)

    You can always add some 3/4" pipes to get your preferred height. I would build everything together and the look, where it gets me. I have seen stills where the outlet is on table height and stills where it is rather low with a bucket under it ;)

    StillDragon Europe - Your StillDragon® Distributor for Europe & the surrounding area

  • SmaugSmaug

    Yes ideally you'll want the parrot elevation set up according to the height of your collection vessel.

    StillDragon North America - Your StillDragon® Distributor for North America

Sign In or Register to comment.