Be part of our community & join our international next generation forum now!
Hey folks, it's been a while since we had a comp or asked for design ideas so while we are ready to update our dial sticker for the DIY kits we thought we'd rely on some of the skills that are bouncing around here.
Prize will be the first new sticker along with a controller kit delivered free for the person who contributes the best design.
This is our current sticker (i've also put it on the StillDragon Australia Facebook page in case it gets messed up here);
The total diameter should be 60mm in the finished artwork. There is however no requirement to stick to a 60mm piece. The area you have to work in for the small kit boxes is around 4" x 6", 100mm x 150mm.
I can't run photo software to save myself, but adding it to a pic i found on the web in here and you get the idea of what may be possible(obviously the dial circle is supposed to be in the cutout);
So have at it and post em up. Have some fun with it but remember the winner will be printed and go out to our customers.
Judged by our team and open to everyone no matter your affiliation with SD (prize to be awarded to best non affiliated member).
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
Comments
No Sticker - Brass Plate - Silk Screen - With Matching Knob.
@grim: LOL! I like it ;)
StillDragon Europe - Your StillDragon® Distributor for Europe & the surrounding area
Off tap!
https://www.youtube.com/watch?v=4xgx4k83zzc
Your Place to be >>> www.StillDragon.org <<< Home of the StillDragon® Community Forum
So, no-one's going to have a go?
Is it the prize or the level of difficulty that's holding people back?
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
I have something in the making :)
c)Lack of Talent
you asked...
:)) =))
StillDragon Europe - Your StillDragon® Distributor for Europe & the surrounding area
LMAO
Lack of imagination?
Actually if I could do it I would have 3 different ones. The AU one would have Punkin's face, the US would have Smaug's and the EU would have Sunshine's.
I'm more like I am now than I was before.
=))
StillDragon North America - Your StillDragon® Distributor for North America
Here is my first mock up. Not as well thought out as @Knafs ideas :)
@punkin Just need to verify the ruler is correct against the original sticker.
in the US we need a inexpensive digital volt / amp meter that is dependable for our controllers...
the dial would then just be a reference.... 8-| :D
I am sure the Punkin, and Miss Sunshine needs em as well ... but 3 different lectrical setups ...
Thanks Zither i was just about to give up on this. That is definate improvement from the standard dial, no doubt. :)>-
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
Punkin how much arc does the knob move?.. you would have to adjust the dial to match the knob movement..???? :-B
@FullySilenced I like the sound of a digital volt / amp meter, would be useful to have.
I'm guessing about as much as in the first pic of the sticker we use now mate.
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
New Sticker ... verify the arc movement of the knob???? Hell I would... to be sure :D
Check it or i will tell the story of how Punkin lost a hundred dollars on the Melbourne Cup, yeah the famous Australian horserace and how he also lost another hundred on the television replay. :))
Don't even have a sweep in the Cup. Can't see the fuss of one stupid horse race over a different stupid horse race. When i gamble on the leg busters i pick a race with less starters and better chance of picking a decent paying winner.
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
I Like it.
StillDragon North America - Your StillDragon® Distributor for North America
Here is my revised version.
Minor changes.
If there's no further action on this then i think a winner will be easy to decide. Anyone else to put their hand up?
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
I'm not that creative. I'd just put gears and boobies on it. Zizther made a nice looking one though.
A boob with a rubber nipple for the pot? I like it.
I'd be fiddling with the power all day :D
@zizther , i'm not sure which region you are in but please PM your local SD agent to get your kit shipped free when the stickers become available.
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
That would be us then I guess ;)
StillDragon Europe - Your StillDragon® Distributor for Europe & the surrounding area
They live!
StillDragon Australia & New Zealand - Your StillDragon® Distributor for Australia & New Zealand
Look very nice!