My StillDragon Controller Build with Active Cooling

So below you will see my take on the StillDragon controller build. If you see something obviously wrong please let me know. I really wish I had used actual 10-3 service cable instead of 10-3 Romex. The Romex is not very flexible. I may re-wire it in the future when I add a display to it.

I read multiple reports of people saying to either upgrade the heatsink or add active cooling to it. I'm a computer nerd so I wired a 120mm LED fan to blow air over the heatsink and exhaust out the holes around the sides of the casing

Internal Wiring, everything look okay?

image

Shot of the completed controller with fan:

image

1.jpg
800 x 600 - 95K
2.jpg
600 x 800 - 74K

Comments

  • Up grade heat sink? Add fan?

    Depends on usage.

    Been running with no fan for several years now. Works great.

    Just sayin.

    StillDragon North America - Your StillDragon® Distributor for North America

  • @Smaug said: Up grade heat sink? Add fan?

    Depends on usage.

    Been running with no fan for several years now. Works great.

    Just sayin.

    Yeah it was basically one of those things where I already had the parts (I mod computers quite a bit) on hand, and it was simple enough, so I did it.

Sign In or Register to comment.